Built-in body for Hansgrohe shower mixer

- The pipes and the taps must be assembled, washed and checked according to current regulations.

- Compliance with the installation guidelines in force in the respective country is mandatory.

- The tap must be installed with insulation and acoustic decoupling.

- Assemble the body so that the outlet connection facing upwards and that the mark on the trim fits with the front edge of the tiles.

- Mounting depth 56mm to 84mm.

- The single-lever mixer must be closed after assembly.

Characteristics of the built-in body for Hansgrohe shower mixer:

- Pressure in service: max. 1 MPa

- Recommended pressure in service: 0.1 - 0.5 MPa

- Test pressure: 1.6 MPa (1 MPa = 10 bar = 147 PSI)

- Hot water temperature: max. 70 ° C

- Temp. recommended hot water: 65 ° C

- Thermal disinfection: max. 70 ° C / 4 min

- Rp 1/2 eccentric couplings: cold right - hot left

- DN15 connections

- Includes: base body, assembly manual