Recharge box with Bluetooth eNEXT M-C2

With a modern and minimalist design, the new eNext range is considered the best recharging option for indoors. It has an APP that is intuitive to use for load monitoring, equipment configuration, remote load activation, time programming to adapt the load to the hourly energy rates, and diagnosis and firmware update.

Thanks to its compatibility with the CirBEON device, which manages the power to be supplied to the vehicle based on the available power, the eNext charger is considered ideal for the domestic sector.

Characteristics of the eNEXT M-C2 recharging box with Bluetooth

Alternating power supply:
- Input current: 32A
- Frequency: 50 … 60 Hz
- Network type: 1F + N + PE
- Nominal voltage: 230 V ~ (± 10 %)

Electrical characteristics:
- Cable: Type of connector (Cable Type 2)
- I max. output current (A): 32
- Charging mode: Mode 3 (according to IEC 61851-1)
- No. of outlets: 1
- Maximum output power (kW): 7.4
- Voltage: 230 V ~ (± 10%)

Mechanical characteristics:
- Size (mm) width x height x depth: 335 x 315 x 179.7 (mm)
- Casing: ABS / PC Self-extinguishing
- Fixing: Vertical, 3 points for wall fixing
- Net Weight (kg): 4

Environmental characteristics:
- Degree of protection: IP 54 / IK10< br>- Relative humidity (without condensation): 5 … 95 %
- Storage temperature: -40 … +60 ºC
- Working temperature: -5 … +45 ºC

Communications< br>- Technology: Bluetooth v4.2 + BLE

User interface
- LED: Charge indicator in RGB color

Standards
- Standards: IEC 61851-1, IEC 62196-1, IEC 62196-2, 2014/35/UE, LVD,2014/30/UE

Performances
- Climate control heater: -30 … +45 ºC (Optional)

Optional
- DC 6mA Leak Detection (requires MCB/RCBO with trip coil to open circuit)
- RCBO: RCD Type A + MCB - includes trip coil
- MCB IEC 60898-1 (Curve C)- includes trip coil
- Transient overvoltage protector IEC 61643-1 (Class I)< br>
Output 1
- Maximum current: 32 A
- Maximum power: 7.4 kW
- Voltage range: 230 Vac
- Connector type: Cable Type 2
- Network type: Single-phase (AC)