Regent 50 liter electric water heater

Characteristics of the 50-liter Regent electric water heater:- Enameled boiler: The boiler is covered with a layer of enamel that protects it from corrosion.- Magnesium anode: It hinders the corrosion of the steel boiler and acts by electrolysis. It adds a rear protection to that provided by the enamel of the boiler itself.- 5-screw plate: The plate is the lower part of the boiler where the electrical resistance is connected. The 5-screw plate that we use in our electric water heaters is developed in our factories to guarantee maximum watertightness of the water heater.- Pilot light: Allows you to check the proper functioning of the electric water heater. The red pilot light comes on when the resistance is heating the water.- Cable with assembled plug: The electric water heater comes ready to be assembled with all the necessary elements for its installation.- Dielectric sleeves: The contact between two natural materials diverse, copper and steel, carries a certain danger. In some cases, the phenomenon of electrolysis can occur, and therefore corrosion. In order to hinder the corrosion of the apparatus in the inlet and outlet tubes, it is necessary to avoid direct contact between these two materials. The dielectric sleeves allow this contact to be avoided.- Cam valve: Controls the water pressure inside the boiler. It is a security against high pressure values and intervenes when the internal pressure exceeds 7-8 kg/cm2. The cam allows the pressure of the boiler to be lowered manually (if the user observes that the electric water heater is leaking, for example.)
Technical characteristics of the Regent 50-liter electric water heater:- Capacity: 50 liters- Power: 1.2Kw- Voltage: 230V- Heating time (ΔT=45°C) (h:min): 2:17h- Thermal dispersion at 65°C (kWh/24h): 0.99- Maximum working pressure (bar): 8 bars- Outlets: 1 /two" - Energy class: C
- Consumption profile: M
- 3 years total guarantee- Product weight: 16 Kg- Product dimensions: 480x450x 573mm