Dimmer for led strips 12-48Vdc Dinuy

- PWM regulator for constant voltage LED strips.

- Power supply from the 12Vdc ~ 48Vdc power supply itself.

- It has a selector to set the minimum level of regulation, avoiding unwanted operations at low values. It allows the variation of the regulation speed by means of a second potentiometer.

- Push button control.

- Operating modes: with memory or without memory. Protected against overloads, short circuits and overheating.

- It has two potentiometers:

«Min»: sets the minimum level of regulation.

«Dim speed»: adjusts the dimming speed between 3sec ~ 10sec.

- Regulator in tablet format, specially developed to control 12 ~ 48Vdc single-color LED strips.

- Maximum capacity of 8A (12Vdc Strip = 96W // 24Vdc Strip = 192W).

- Pulse modulation (PWM) regulation technology.

- Control by conventional pushbuttons: short keystrokes turn on / off and sustained keystrokes regulate.

- Memory function

- Extra-flat format only 12mm thick. Mounting inside the mechanism box, behind the button.

- Protected against overloads, short circuits and overheating

Characteristics of the regulator for 12-48Vdc led strips:

- Power supply voltage: 12Vdc ~ 48Vdc

- Consumption: <12mA

- Valid for: 12V ~ 48V Monocolor LED Strips

- Control: Pushbutton referred to Ground or Isolated pushbutton referred to 230V

- Maximum Load: 8A (Strip 12V = 96W // Strip 24V = 192W)

- Minimum regulation level: 1% ~ 60% (selectable)

- Regulation speed: 0% to 100% = 3sec ~ 10sec (selectable)

- Control: Pushbutton referred to Ground or Isolated pushbutton referred to 230V ~

- Maximum Number of Buttons: Unlimited

- Dimensions: 46 x 46 x 19mm

- Operating temperature: 0º ~ + 40ºC

- Storage temperature: -30º ~ + 70ºC

- Degree of protection: IP20 according to UNE20324

- According to the Standard: UNE-EN 60669-2-1