RESISTANT proximity reader with external controller

Vandal resistant proximity reader, narrow profile and small dimensions. It allows working in standalone or centralized mode, depending on the Wiegand 26 controller to which it is connected.

Standalone mode with external controller (reference 5276 is required)
Maximum capacity of up to 1,000 users.
MINI controller:
- 2A relay output. By default, it supplies 12Vdc between the GND, NO terminals. By changing some internal jumpers it becomes a dry contact. Configurable from 1-99 (5s by default) or bistable (when presenting the card the relay is activated and when presenting it again it is deactivated).
- Exit button input. GND, OPEN.

The controller allows up to 2 different types of access by installing a proximity reader.
- Card only
- Multi-card: Presenting between 2 and 9 valid cards will open the door. The Multicard access type allows the user to always be accompanied. For example, if the controller is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until two additional valid cards are presented (for example, those of the guards) the door will not open.
Each user is associated with an identifier number called ID (1-999). Users with ID (1-999) are standard users who upon presentation of a valid card will open the door.
The controller is supplied with two master cards that allow registering or deleting cards or key rings.

Centralized mode with external controller:
To access the user database on a PC or allow access to more than 1,000 people this Wiegand 26 proximity reader can be directly connected to a controller for that can be installed in a centralized system such as AC+, AC-MAX and IP AXES which will allow you to have a record of inputs and outputs knowing the time, user and access.

Technical specifications of the RESISTANT proximity reader with external controller :

Mechanical characteristics appearance of the RESISTANT proximity reader with external controller:
- 3 mm aluminum Surface fixing system.
- Concealed screws.
- IP66
- Dimensions for mounting on surface: (48(H) x 103(V) x 20(P) mm.

Technical characteristics of the RESISTANT proximity reader with external controller:
- Power supply:
Autonomous 12 Vdc (9 -24Vdc)
Centralized: 12Vdc.
Standby consumption: 12Vdc / 25mA
- Operating temperature: [-20ºC, +60ºC]
- Humidity: [10%, 95%]
- Compatibility: EM(125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/keychains
- Wiegand 26 proximity protocol. RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA /m.

Characteristics for autonomous wiring (with external controller ref. 5276):
- +DC (Red): 12Vdc supply positive
- GND (Black): 12Vdc supply negative
- D0 (Green), D1 (White): Wiegand 26 connection.
- LED (Brown): Control LED
- BZ (Yellow): Acoustic signal.

Characteristics for centralized wiring:
- + (Red): 12Vdc power supply positive
- - (Black) : Negative 12Vdc supply
- DT, DO (Green), CK,D1 (White)
- G (Brown): LED control.
- Buzzer (Yellow): Acoustic signal.

Accessories (not included):
- Ref. 1076 - Magnetic contact. Door sensor.
- Ref. 5287 - Embedded pushbutton
- Ref. 5288 - Surface pushbutton
- Ref. adjustable latch)
- Ref. 4813 - Power supply 12vdc/2a
- Ref. 4802 - Power supply 12vac/1a