Sololift2 WC-1 grinder Grundfos

Sololift2 WC-1 is a compact and small lifting station suitable for pumping sewage from private wells where the water cannot be discharged directly into the main sewer naturally.

Sololift2 WC-1 is suitable for pumping wastewater containing faeces and toilet paper with an additional connection in the lid for, for example, a sink.

Pumping liquids containing other material may cause failures and limit the scope of the warranty .

Sololift2 WC-1 is generally used to evacuate water from toilets and sinks in basements below the sewer level, in connection with the renovation or modernization of existing buildings, where the location may be remote from the network so that a natural slope cannot be established.

The lifting station is equipped with:
- Cable with or without plug (see technical data)
- Possibility of horizontal or vertical fixing of the connect discharge pipe or for various adapters for Ø22-40mm pipes
- Integrated non-return valve
- High-performance, non-wet contact motor unit including thermal protection, level switch and controller
- DN100 toilet connection hose
- Flexible connectors for inlet (height adjustable) of Ø36 or 40 pipes
- Slot for an alarm board with buzzer (accessory)
- Manual anti- block and separate drain connector for maintenance
- Aeration valve with overflow protection
- Uplift fixing clips
- Designed in accordance with EN12050-2 and production is supervised by an external institute with the sole objective of achieving quick installation, long-lasting operation and simple and clean maintenance.

Characteristics of the Sololift2 WC-1 shredder:
- Liquid temperature range: 0 .. 50 °C
- Density: 998.2 kg/m³
- Default speed: 2800 rpm
- Flow n ominal: 1.37 l/s
- Maximum flow rate: 2.48 l/s
- Nominal head: 6.21 m
- Impeller type: VORTEX with GRINDER
- Maximum particle size: 25 mm
- Approvals: CE,VDE,SEPRO,CHROHS,MORO,AAA
- Curve tolerance: ISO9906:2012 3B
- Hydraulic body: Composite
- Impeller: Polymer - PPE
- Tank: Plastic, PP
- Ambient temperature range: 0 .. 40 °C
- Inlet connection type: Smooth pipe
- Outlet connection type: Smooth pipe
- Inlet connection size : 32/36/40, DN 100
- Outlet connection size: 22/25/28/32/36/40
- Nominal pressure for the connection: PN 1.5
- Number of wires: 3X0,75MM2
- Input power P1: 620 W
- Nominal power - P2: 0.42 kW
- Mains frequency: 50 Hz
- Nominal voltage: 1 x 220-240 V
- Nominal current: 3 A
- Cos phi - Power factor: 0.92
- Number of poles: 2
- Degree of protection (IEC 34-5): IP44
- Insulation class (IEC 85): F
- Cable type: H05VV-F-3G
- Power cable length: 1.2 m
- Plug: SCHUKO
- Nominal tank volume: 9 l
- Net weight: 7.52 kg