Split 1x1 inverter air conditioning Giada S 18 with WiFi Ferroli

The GIADA S 18 model air conditioner from the Ferroli brand offers a capacity of 4500 frigories, with an INVERTER heat pump and A++/A+++ energy efficiency. Its cooling power is 5.27 kW and its heating power is 4.97 kW. This 1x1 wall split model uses DC Inverter technology and has an A++ energy rating for cooling and A+++ for heating. It includes a heat pump and has an advanced filtration system thanks to its triple filter. It uses R-32 refrigerant gas, which is more environmentally friendly and emits fewer polluting gases than R-410a. The dimensions of the indoor unit are 302 mm x 957 mm x 213 mm and those of the outdoor unit are 554 mm x 877 mm x 330 mm.

The Ferroli GIADA S 18 Split air conditioner incorporates DC inverter technology, which allows a wide modulation of the compressor and a low starting intensity, optimizing energy consumption. Its indoor unit has compact dimensions, facilitating its installation in small spaces and its integration into any room.

The Ferroli GIADA S 18 air conditioner, with a capacity of 4500 frigories and a heat pump, has a high capacity filtration thanks to several filters, including the Bio Hepa Filter that eliminates dust and sterilizes bacteria, fungi and microbes. In addition, the triple filter that includes Cold Catalyst, Active Carbon and Silver Ion filters acts against fungi, spores, dust, viruses and harmful gases. Also, the super ionizer generates millions of ions to reduce the load of viruses and bacteria in the air.

This model, with a capacity of 4553 frigories, also includes a battery with Golden Fin protection, which covers the outdoor unit to prevent corrosion and repel moisture, thus prolonging its useful life. In addition, it includes a remote control and WiFi connection as standard, allowing control of the equipment through the Ferroli Connect App from any mobile device or tablet. It is compatible with Google Home and Amazon Alexa, allowing it to be operated using voice commands.

Main features of the Giada S 18 1x1 inverter split air conditioner with WiFi:
- Wifi control system integrated into the equipment as standard, compatible with Google home and Alexa.
- The advanced super ionizer included in the equipment generates millions of ions, similar to those found in nature, which help eliminate the load of viruses and bacteria in the environment .
- High level of filtration thanks to the 4 different types of filter.
- Protection against corrosion of our equipment by incorporating the new GOLD (Golden Fin) battery in the Outdoor Unit.
- Pure HDC type R32 gas, with a very low global warming potential index compared to other refrigerants, with thermodynamic properties that provide great energy efficiency.
- Ion generator as standard.
- High level of filtration: BIO HEPA, COLD CATALYST, ACTIVE CARBON and SILVER ION filters as standard.
- Outdoor unit with special anti-corrosion treatment and outdoor battery with GOLD protection (Golden Fin).
- WIFI connection AS STANDARD. Possibility of control through smartphone APP. Compatible with GOOGLE HOME and ALEXA.
- Equipped with DC Inverter technology.
- Indoor Unit with large LED display and IR remote control.
- Modern and elegant design in the Indoor Unit.
- Unit Exterior with covered refrigerant connections.
- Reduced noise level of both the Indoor Unit and the Outdoor unit.
- Automatic reset in case of power failure.
- Night mode operation function.< br>- Operation function in automatic mode and self-diagnostic test.
- Daily ON-OFF programming.

Technical characteristics of the Giada S 18 1x1 inverter split air conditioner with WiFi:
- Cold energy classification : A++
- Warm/medium climate heat energy classification: A+++ / A+
- Cooling/Heating Capacity (CC/HC): 5.27 / 4.97 kW
- Power supply: 220-240 V / 1 f / 50 Hz
- Nominal cooling power: 5,270 W / 4,553 frig/h
- Nominal cooling mode absorbed power / min. / max: 1,550/560/2,050 W
- Nominal cooling mode current: 6.7 A
- EER ref. EN14511 standard nominal: 3.4
- Nominal heating power: 4,970 W / 4,294 kcal/h
- Nominal heat mode absorbed power / min. / max.: 1,298/780/2,000 W
- Nominal heat mode current: 5.64 A
- COP ref. EN14511 standard nominal: 3.83
- SCOP ref. standard EN14825 warm/medium climate: 5.1/4
- Climatic zone ref. EN14825 standard: A (Average-media)
- PdesignH warm / medium climate: 4.4 / 4.1 kW
- Bivalent temperature Tbiv / use limit Tol: -7 / -15 ºC
- Consumption in stand-by: 0.5 W
- Max. indoor unit air flow. / med. / min: 840/680/540 m3/h
- Sound pressure indoor unit max. / med. / min. / slow: 42.5/36/26/25 dB(A
- Max indoor unit sound power: 56 dB
- Outdoor unit air flow: 2,100 m3/h
- Outdoor unit sound pressure: 56 dB
- Outdoor unit sound power: 63 dB
- Refrigerant: R32
- GWP: 675 kg CO2 eq.
- Refrigerant charge: 1.08 kg
- Liquid connection diameter : 1/4"
- Gas connection diameter: 1/2"
- Max/min refrigerant line length: 30/3 m
- Maximum difference in level between indoor and outdoor unit: 10 m.
- Indoor unit net weight: 10 kg. - Outdoor unit net weight: 32.7 kg.