Type 2 transient overvoltage limiter, Acti9 iPF K, 1P+N, 40 kA, 340V

Characteristics of the transient overvoltage limiter type 2, Acti9 iPF K, 1P+N, 40 kA, 340V:
- Product range: Acti 9
Product name: Acti 9 iPRC
Type of product or component : Surge arrester
Device short name: IPF K
Device application: For current>, 0.1 A
Number of poles: 1P + N
Remote signalling: Without
Type surge arrester: Electrical distribution network
- Grounding system:
TT
TN-S
- Type and class of surge arrester: Type 2
- Surge arrester technology surge current: MOV + GDT
- [Ue] Rated operational voltage: 230 V AC - type of cable: +/- 10 %) at 50/60 Hz
- [In] nominal discharge current:
Common mode, state 1 15 kA - cable type: L/PE)
Common mode, state 1 15 kA - cable type: N/PE)
Differential mode, state 1 15 kA - cable type : L/N)
- [Imax] maximum discharge current:
Common mode, state 1 40 kA L/PE
Common mode, state 1 40 kA N/PE
Differential mode, state 1 40 kA L/N
- [Uc] maximum continuous operating voltage:
Common mode, state 1 260 V N/PE
Differential mode, state 1 340 V L/N
- [Up] voltage protection level:
Common mode <,1.5 kV type 2 N/PE
Differential mode <,1,5 kV type 2 L/ N
- [Ut] temporary overvoltage:
337 V L/N 5 s maintained
442 V L/PE 5 s maintained
1200 V N/PE 200 ms maintained
1453 V L/PE 200 ms maintained
- Type of disconnecting device:
Associated automatic switch iK60N 40 A curve C - Icu 6 kA
Associated fuse gG 63 A - Icu 25 kA
- [Isccr] short-circuit current rating: 25 kA
- Signaling circuit voltage: 0.25 A 250 V AC 50/60 Hz
- Mounting type: Adjustable clip
- Mounting support: DIN rail
- 9 mm pitches : 4
- Height: 81 mm
- Width: 36 mm
- Depth: 69 mm
- Product weight: 210 g
- Colour: White - cable type: RAL 9003 )
- Response time: <,= 25 ns
- [Ipe] G round residual current: 0.003 mA
- Connections - terminals:
Tunnel type terminal - cable type: top or bottom) 25 mm² rigid
Tunnel type terminal - cable type: top or bottom) 16 mm² flexible
Tunnel type terminal - type of cable: top or bottom) 16 mm² flexible with terminal
- Stripped cable length to connect terminals: 11 mm
tightening torque: 3.5 N.m
- Standards : IEC 61643-11:2011
- Product certifications:
Generator
CE
- Degree of protection IP:
On the front face, state 1 IP40 conforming to IEC 60529
En terminal, state 1 IP20 conforming to IEC 60529
- IK degree of protection: IK03 conforming to IEC 62262
- Relative humidity: 5…95%
- Maximum operating altitude: 2000 m
- Temperature operating ambient: -25…60 °C
- Storage ambient temperature: -40…85 °C