Unilift KP 150 A1 submersible pump with 5m cable Grundfos

The pump has a suction filter and a handle, and is supplied with a 5 m mains cable and a float for automatic start and stop.

The impeller is a semi-open impeller for free flow 10 mm, suitable for pumping groundwater, surface water, rainwater and similar liquids.

The pump has a double seal consisting of two grease-lipped joints between them.

The pump has an outer casing that guarantees continuous cooling of the motor by the pumped liquid. The rotor shaft rotates in two maintenance-free carbon bearings, cooled by the pumped liquid.

The motor is filled with a non-toxic motor liquid.


Characteristics of the  ;Unilift KP 150 A1 230V pump with 5m cable:
- Pumped liquid: Any viscous liquid
- Liquid temperature range: 0 .. 50 °C
- Density: 998.2 kg/m³
- Maximum particle diameter: 10 mm
- Pump casing: Stainless steel DIN W.-Nr. 1.4301 AISI 304
- Impeller: Stainless steel DIN W.-Nr. 1.4031 AISI 304
- Pump output: Rp 1 1/4
- Maximum installation depth: 2 m
- Input power - P1: 300 W
- Network frequency: 50 Hz < br>- Rated voltage: 1 x 220-230 V
- Rated current: 1.3 A
- Capacitor size - Operation: 8 µF/400 V
- Degree of protection (IEC 34-5): IP68
- Insulation class (IEC 85): F
- Cable length: 5 m
- Cable plug type: SCHUKO
- Net weight: 6.5 kg
- Gross weight: 5.9 kg
- Transport volume: 0.013 m³

* Does not include fittings