More informationMain features of the Multimat wall motion detector:
- Motion detector for surface mounting on a wall or ceiling, it can also be installed in corners or corners.
- IP55 protection against ingress of dust and water jets according to EN 60529.
- Adjustable parameters: timing and light sensitivity.
- Field limiter. Overrides detection in specific areas of the catchment area.
- Status LED that lights up when the equipment detects movement.
Technical characteristics of the Multimat wall motion detector:
- Power supply: 230 Vac, 50 Hz
- Breaking power: 10 A 230 Vac
- Timing: from 3s to 30 min.
- Light sensitivity: adjustable 5-2,000 lux
- Temp. operation: -20 ºC to +40 ºC
- Degree of protection: IP55 according to EN 60529
- Detection angle: 200º
- Front detection field: 12 m at 20ºC
- Lateral detection field: 8 m at 20ºC
- Maximum loads:
Incandescent lamps: 2000 W
Fluorescent: 1200 VA
Low voltage halogens: 1200 VA
Halogens (230V AC): 2000 W
Low consumption lamps: 1200 VA
Downlights: 1200 VA
Led lamps: 400 VA