130mm circulator pump between threads for Gut heating

In domestic heating installations it is recommended that the water temperature does not exceed 65ºC to avoid calcareous precipitation.

Advantages of the 130mm threaded circulator pump for heating:
- The combination of the variable frequency drive with a permanent magnet motor guarantees the highest level of efficiency and energy savings.
- Quick connector that allows a quick and easy electrical connection without having to open the junction box.
- Simple regulation of the working parameters that allows, by means of a single button, a quick and intuitive modification of the operating requirements.
- Auto operating mode: factory-defined parameters for normal operation in 80% of the facilities.

Main characteristics of the circulator pump of 130mm between threads for heating:
- Body of the pump in gray cast iron.
- Die-cast aluminum motor cover.
- Turbine in composite pes.
- Ceramic motor shaft mounted on graphite bearings lubricated by the pumped liquid.
- Stainless steel rotor, stator and seal flange sleeves.
- Synchronous wet rotor motor with frequency variator.

Technical characteristics of the circulator pump of 130mm between threads for heating:
- Distance between threads: 130mm
- Voltage: 1x220v.
- Degree of protection: IP 44.
- Insulation class: F.
- Ambient temperature: from 0ºC to 40ºC.
- Liquid temperature: from 2ºC to + 110ºC.
- Loudness level: 43 db (A).
- Maximum working pressure: 10 bars.
- DN: G1 1/2 "
- Fitting connections: G1 "
- Installation: With the motor shaft in horizontal position.
- Includes fittings and insulation
- Pumped liquid: Clean, without solid substances or mineral or viscous oils and chemically neutral.
- Energy efficiency: A