Condensation Pump Sanicondens Clim Mini KCLIMMINI3S

It allows to evacuate the water generated by an air conditioning device to the nearest drain.

The reduced measurements of the detection block (75 x 36 x 38 mm) allows it to be placed directly inside the split tray to be as discreet as possible. The pump block has also been miniaturized to a size of only 86 x 29 x 48mm. The pump block can thus be hidden inside a gutter or directly in a false ceiling.

It has a very simple operation: the condensates enter the SANICONDENS Clim Mini detection block by gravity. This block has a float that, when the condensate enters, rises and then sends a signal to the pump-block to start operation. The pump block sucks in the condensates, the detection float goes down again and then the motor stops. SANICONDENS Clim Mini is ready for a new cycle.

It has a very low operating sound level of only 23 dB (A).

For user peace of mind, the pump is pre-wired to connect a visual and / or audible alarm system. A circuit can also be mounted so that the alarm stops the air conditioning machine in the event of a fault.

Characteristics of the Condensacion Sanicondens Clim Mini KCLIMMINI3S pump:

- Supply voltage: 220-240 V

- Protection index: IP20

- Sound level: 23 dB (A)

- Maximum horizontal evacuation: 60 m

- Maximum vertical evacuation: 6 m

- Maximum flow: 15 l / h

- Inlet diameter: 16 mm

- Evacuation diameter: 8-10 mm

- Maximum temperature of the incoming water: 35 ° C

- Power frequency: 50-60 Hz

- Maximum absorbed power: 22 W