Geberit Duofix frame for 82 cm wall-hung toilet

The Geberit Kombifix Racks for toilets provide appropriate solutions for the installation of the wall-hung toilet. They are available in various designs for part height and full height walls, in heights of 82 and 108 cm.

The Geberit Kombifix Frames for wall-hung toilets are equipped with concealed cisterns whose technology has proven itself for decades. They can be equipped with a 12 cm Sigma concealed cistern for front actuation or a 15 cm Kappa concealed cistern for front or top actuation.

Applications:

- For light wall mounting

- For installation in front of a wall with partial height

- For wall-hung toilets with connection measures according to EN 33: 2011

- For wall-hung toilets with projection up to 62 cm

- For double discharge

- For screed heights of 0-20 cm

Properties:

- Self-supporting frame with oven powder paint

- Frame with ø 9 mm holes for fixing in wood panel construction

- Frame prepared for ceramic toilet supports with reduced support surface

- Galvanized support legs

- Adjustable support leg 0-20 cm

- Support legs with non-slip properties

- Adjustable support plates

- Depth of support bars suitable for installation on U-profiles, UW 50 and UW 75, and Geberit Duofix rail rails

- Drain elbow mountable without tools in different depth positions, 45mm adjustment area

- Fixing for acoustically insulated drain elbow

- Built-in cistern with top or front drive

- Built-in cistern fully insulated against condensation

- With factory settings immediate rinsing is possible

- Assembly and maintenance in the concealed cistern without tools

- Left side or left rear supply connection

- Pre-assembly box for humidity and dirt

- Pre-assembly box for registration, can be trimmed

- Equipped with guide tube for the water supply for connection of Geberit AquaClean bidet toilets

- With the possibility of fixing for electrical connection

Scope of supply

- Rp 1/2 "supply connection, MF compatible, with integrated square wrench and thread

- Pre-assembly box for registration

- Toilet hose set, ø 90 mm

- PVC drain elbow, ø 90 mm

- PVC adapter sleeve, ø 90/110 mm

- 2 protection caps

- 2 M12 threaded rods

- Fixing material

Technical information:

- Dynamic pressure: 0.1-10 bar

- Maximum water temperature: 25 ° C

- Discharge volume, factory setting: 6 and 3 l

- Total discharge, adjustment range: 4.5 / 6 / 7.5 l

- Partial discharge, setting range: 3-4 l

- Minimum flow pressure for calculated flow 0.5 bar

Scope of supply:

- Rp 1/2 "supply connection, MF compatible, with integrated square wrench and thread

- Pre-assembly box for registration

- Discharge elbow with protective envelope

- Protection cap

- 2 perforated iron plates

- Fixing material

Complementary accessories:

- Geberit bracket set for ceramic toilets with reduced footprint

- Geberit Duofix wall anchor set for individual mounting

- Geberit Duofix leg extension set for screed height 20-40 cm

- Geberit recessed box for light wall and masonry wall construction