Unilift bilge pump AP35B.50.06.A1V Grundfos

Submersible effluent and vertical single-stage stainless steel pump with built-in 1-phase submersible motor.

The pump has a ring base and a handle and is supplied with a 5 m mains cable and a level switch for starting and automatic stop.

The impeller is a VORTEX impeller pumping surface water, ground water, sewage water and the like.

The pump has a double seal and an oil filled intermediate oil chamber special non-toxic The insulation class of the motor is F with thermal overload protection and long life grooved ball bearings, greased for life.

It is ready for both stand-alone installation and with an auto-coupling system.
< br>Technical characteristics of the Unilift bilge pump AP35B.50.06.A1V:
- Liquid temperature range: 0 .. 40 °C
- Density: 998.2 kg/m³
- Maximum flow: 5 l/s
- Impeller type: VORTEX
- Maximum particle size: 35 mm
- Approvals: CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,SEPRO
- Rated speed actuator speed: 2810 rpm
- Hydraulic body: Stainless steel
- Pump casing: EN 1.4301, AISI 304
- Impeller: Stainless steel, EN 1.4301, AISI 304
- Ambient temperature range : 0 .. 40 °C
- Connection type: Rp
- Connection size: 2 inch
- Maximum installation depth: 2 m
- Self-coupling: Y
- Place of installation: Indoor
- Input power P1: 1 kW
- Motor type single-phase: PSC
- Rated power - P2: 0.66 kW
- Mains frequency: 50 Hz
- Rated voltage: 1 x 230 V
- Rated current: 4.6 A
- Cos phi - Power factor: 0.98
- Actuator rated speed: 2810 rpm
- Capacitor size - Operation: 16 µF/400 V
- Protection degree (IEC 34-5): IP68
- Insulation class (IEC 85): F
- Power cable length: 5 m
- Cable plug type: SCHUKO
- Net weight: 9.9 kg