Unilift-CC5A1 Grundfos bilge pump

Grundfos Unilift DC pumps are submersible pumps with low suction capacity below 3mm. The pumps are designed to pump rainwater and sewage, for example:
o Washing machines, baths, sinks, etc. installed in basements and raise them to the level of the sewage system o Basements or buildings susceptible to flooding o Drainage wells o Wells for surface water with inlets from water collection gutters located on the roof, wells, tunnels, etc. o Swimming pools, ponds or fountains.

The pumps are suitable for fixed installations or for portable use. They are suitable for automatic operation. The pumps allow a free passage of particles with a diameter of up to 10 mm.

The motor incorporates an automatic overload protection that cuts the motor in case of overload. When it returns to normal temperature, it restarts the motor automatically.

Technical characteristics of the Unilift-CC5A1 bilge pump:
- Nominal flow: 0.711 l/s
- Maximum flow: 1.67 l /s
- Nominal height: 2.52 m
- Maximum particle: 10 mm
- Approvals: CE,LGA,VDE,UKCA,SEPRO
- Nominal speed of the actuator: 2850 rpm
- Hydraulic body: Polypropylene
- Pump housing: PP - GF15
- Impeller: Composite, PP 20 GF
- Motor: Stainless steel, EN 1.4301, AISI 304
- Shaft: Stainless steel, EN 1.4301 , AISI 304
- Ambient temperature range: 0 .. 40 °C
- Connection type: R
- Connection size: 1 1/4 inch
- Maximum installation depth: 2 m
- Liquid temperature range: 0 .. 40 °C
- Density: 998.2 kg/m³
- Input power P1: 250 W
- Mains frequency: 50 Hz< br>- Nominal voltage: 1 x 220-240 V
- Nominal current: 0.98 A
- Nominal speed of the actuator: 2850 rpm
- Capacitor size - Operation : 4 µF/450 V
- Degree of protection (IEC 34-5): IP68
- Insulation class (IEC 85): B
- Integrated motor protection: YES
- Length of power cable: 5 m
- Cable plug type: SCHUKO
- Net weight: 4.51 kg