Unilift KP 350 A1 submersible pump with 5m Grundfos cable

Submersible bilge and vertical single-cell stainless steel pump with vertical discharge mouth and 1-phase submersible motor encapsulated in insulation class F with protection against thermal overload.

The pump has a suction filter and a handle, and is supplied with a 5m mains cable and a float for automatic start and stop.

The impeller is a semi-open impeller for a free passage of 10mm, suitable for pumping groundwater, surface water, rainwater and similar liquids.

The pump has a double seal consisting of two lip seals with grease between them.

The pump has an outer casing that guarantees continuous cooling of the motor by the pumped liquid. The rotor shaft rotates in two maintenance-free carbon bearings, cooled by the pumped liquid.

The motor is filled with a non-toxic motor liquid.

Features of the Unilift submersible pump KP 350 A1 with 5m cable:
- Liquid temperature range: 0 .. 40 °C
- Density: 998.2 kg/m³
- Maximum flow: 3.89 l/s
- Maximum particle : 10 mm
- Approvals: CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,SEPRO
- Hydraulic body: Stainless steel
- Pump casing: EN 1.4301, AISI 304< br>- Impeller: Stainless steel, EN 1.4301, AISI 304
- Ambient temperature range: 0 .. 50 °C
- Connection type: Rp
- Connection size: 1 1/4 inch
- Maximum installation depth: 2 m
- Place of installation: Indoor
- Input power - P1: 720 W
-Mains frequency: 50 Hz
- Nominal voltage: 1 x 220-240 V
- Nominal current: 3.2 A
- Capacitor size - Operation: 10 µF/400 V
- Degree of protection (IEC 3 4-5): IP68
- Insulation class (IEC 85): F
- Power cable length: 5 m
- Cable plug type: SCHUKO
- Net weight: 7.2 kg